Formulation Material
Acrylic Emulsion for Labeling Adhesives
Water-based acrylic polymer emulsion for labeling adhesive formulation and modification.
Not a finished labeling adhesive for direct use.
Product Overview
Material for Formulation Work
This acrylic emulsion is intended for use in the formulation and modification of labeling adhesives, including evaluation as a water-resistance enhancing component.
It should be assessed within the customer’s complete formulation and process.
Application / Positioning
Formulation and Modification Discussion
Base Formulation
Describe the existing adhesive system and formulation objective.
Modification Goal
Define the target change, including water-resistance or other application priorities.
Evaluation Plan
Confirm laboratory and production verification requirements.
Typical Emulsion Properties
Formulation material, not a finished labeling adhesive for direct use. The properties below describe the acrylic emulsion itself.
| Property | Typical / Reference Value |
|---|---|
| Appearance | White liquid |
| Odor | No irritating odor |
| pH | 3–4 |
| Solids Content | >40% |
| Viscosity | Not specified in the current verified TDS |
| Direct Labeling Line Speed | Not applicable |
| Direct Drying Time | Not applicable |
| Direct Water Resistance | Not applicable |
Reference Finished-Adhesive Performance
These figures refer to a reference finished labeling-adhesive formulation prepared using the acrylic emulsion. They do not represent direct-use performance of the acrylic emulsion itself.
| Reference Formulation Property | Reference Value |
|---|---|
| Water Resistance | ≥10 days |
| Alkali Wash-Off | <5 min under the stated reference test conditions |
| Reference Line Speed | Up to 60,000 bottles/hour* |
*Actual performance and line speed depend on bottle, label, machine settings and operating conditions and should be confirmed by production-line trials.
Values shown are typical or reference values based on current product information and specified test conditions. Actual results may vary with bottle, label material, machine configuration and operating conditions. Final suitability should be confirmed by application testing or production-line trials.
Technical Support for application testing and production-line evaluation.
What to Evaluate
Information for Material Review
Formulation Type
Current system and component context.
Target Property
Modification or performance objective.
Process Conditions
Mixing, application and production context.
Verification
Laboratory and production evaluation plan.
Discuss Your Formulation Requirements
Share the formulation context, modification goal and evaluation approach.